Skip to Content
You are currently on the new version of our website. Access the old version .

1,069 Results Found

  • Article
  • Open Access
3 Citations
2,001 Views
17 Pages

Influence of Abrasive Flow Rate and Feed Rate on Jet Lag During Abrasive Water Jet Cutting of Beech Plywood

  • Monika Sarvašová Kvietková,
  • Ondrej Dvořák,
  • Chia-Feng Lin,
  • Dennis Jones and ,
  • Petr Ptáček and
  • Roman Fojtík
  • + 1 author+ 0 author

6 August 2025

Cutting beech plywood using abrasive water jet (AWJ) technology represents a significant area of research due to increasing demands for precision, quality, and environmental sustainability in manufacturing processes within the woodworking industry. A...

  • Article
  • Open Access
13 Citations
3,468 Views
15 Pages

8 February 2021

The abrasive mixing variables, such as the abrasive and water flow rates and the focus geometry parameters, determine the profitability of an abrasive waterjet system. In this study, the mixing efficiency characteristics in abrasive waterjet rock cut...

(This article belongs to the Section Civil Engineering)
  • Feature Paper
  • Article
  • Open Access
6 Citations
3,198 Views
24 Pages

31 August 2024

This study presents a comprehensive three-dimensional computational fluid dynamics (CFD) analysis of abrasive fluid flow and its erosive effects on the active components of the WUXI YCWJ-380-1520 water jet cutting machine. The research investigates t...

(This article belongs to the Special Issue Applications of Computational Fluid Dynamics (CFD) in Chemical Process Simulations)
  • Article
  • Open Access
24 Citations
2,804 Views
20 Pages

13 February 2022

This article deals with the evaluation of selected aspects of abrasive water jet technology (AWJ) in the cutting of abrasion-resistant steel (HARDOX 500) with a thickness of 40 mm. The high abrasion resistance as a typical significant property of thi...

(This article belongs to the Special Issue Advanced Technology of Material Processing: Abrasive Water Jet Machining)
  • Article
  • Open Access
2 Citations
969 Views
25 Pages

25 May 2026

Geopolymer gel concrete (GPC) is a kind of environmentally friendly concrete, which has become a potential alternative material to replace ordinary concrete. Traditional mix design of GPC is carried out under experimental conditions, which is time-co...

(This article belongs to the Special Issue Novel Polymer Gels: Synthesis, Properties, and Applications (2nd Edition))
  • Feature Paper
  • Article
  • Open Access
22 Citations
2,954 Views
15 Pages

31 July 2021

Vibration measurement belongs amongst the most important activities for the correct and stable operation of machines in terms of quality, economy, and safety. Monitoring the condition of the machine provides the key data for the detection of machine...

(This article belongs to the Special Issue Advanced Technology of Material Processing: Abrasive Water Jet Machining)
  • Article
  • Open Access
19 Citations
4,103 Views
22 Pages

The Predictive Model of Surface Texture Generated by Abrasive Water Jet for Austenitic Steels

  • Ján Kmec,
  • Miroslav Gombár,
  • Marta Harničárová,
  • Jan Valíček and ,
  • Milena Kušnerová,
  • Jiří Kříž,
  • Milan Kadnár,
  • Monika Karková and
  • Alena Vagaská
  • + 4 authors+ 0 author

1 May 2020

Austenitic stainless steel belongs to the best oxidation-resistant alloys, which must function effectively and reliably when used in a corrosion environment. Their attractive combination of properties ensures their stable position in the steel indust...

  • Article
  • Open Access
12 Citations
6,069 Views
17 Pages

Tyre Wear under Urban, Rural, and Motorway Driving Conditions at Two Locations in Spain and China

  • Barouch Giechaskiel,
  • Theodoros Grigoratos,
  • Liang Li,
  • Sheng Zang and ,
  • Bo Lu,
  • David Lopez and
  • Juan J. García
  • + 2 authors+ 0 author

30 September 2024

The recently introduced Euro 7 emissions standard regulation foresees the addition of abrasion limits for tyres sold in the European Union. The measurement procedures for tyre abrasion are described in the newly introduced Annex 10 of the United Nati...

(This article belongs to the Special Issue Emission and Transport of Wear Particles)
  • Review
  • Open Access
2 Citations
3,040 Views
29 Pages

Abrasive Water Jet Machining (AWJM) of Titanium Alloy—A Review

  • Aravinthan Arumugam,
  • Alokesh Pramanik,
  • Amit Rai Dixit and
  • Animesh Kumar Basak

31 January 2026

Abrasive water jet machining (AWJM) is a non-traditional machining process that is increasingly employed for shaping hard-to-machine materials, particularly titanium (Ti)-based alloys such as Ti-6Al-4V. Owing to its non-thermal nature, AWJM enables e...

(This article belongs to the Special Issue Studies in Advanced and Selective Manufacturing Technologies)
  • Article
  • Open Access
7 Citations
2,194 Views
14 Pages

Abrasion Wear Resistance of Precipitation-Hardened Al-Zn-Mg Alloy

  • Tomislav Rodinger,
  • Helena Lukšić,
  • Danko Ćorić and
  • Vera Rede

19 May 2024

The heat treatment of aluminum alloys is very important in industries where low weight in combination with high wear resistance, good strength, and hardness are important. However, depending on their chemical composition, aluminum alloys are subjecte...

(This article belongs to the Section Mechanics of Materials)
  • Article
  • Open Access
32 Citations
5,889 Views
25 Pages

Analysis and Optimization of Process Parameters in Abrasive Waterjet Contour Cutting of AISI 304L

  • Jennifer Milaor Llanto,
  • Ana Vafadar,
  • Muhammad Aamir and
  • Majid Tolouei-Rad

30 August 2021

Abrasive waterjet machining is applied in various industries for contour cutting of heat-sensitive and difficult-to-cut materials like austenitic stainless steel 304L, with the goal of ensuring high surface integrity and efficiency. In alignment with...

(This article belongs to the Special Issue Optimization and Analysis of Metal Cutting Processes)
  • Article
  • Open Access
4 Citations
7,632 Views
25 Pages

Wear of Passenger Car C1 Tyres Under Regulatory On-Road Testing Conditions

  • Barouch Giechaskiel,
  • Christian Ferrarese,
  • Theodoros Grigoratos and
  • Vicente Franco

27 August 2025

Tyre wear is a major contributor to global microplastic pollution, affecting air, soil, water, and wildlife as well as human health. In the European Union (EU), the latest Euro 7 regulation foresees the introduction of tyre abrasion limits covering a...

  • Article
  • Open Access
11 Citations
3,702 Views
13 Pages

Parameter Optimization and Effect Analysis of Low-Pressure Abrasive Water Jet (LPAWJ) for Paint Removal of Remanufacturing Cleaning

  • Sheng Xiong,
  • Xiujie Jia,
  • Shuangshuang Wu,
  • Fangyi Li and ,
  • Mingliang Ma and
  • Xing Wang
  • + 1 author+ 0 author

8 March 2021

As an environmentally friendly method, water jet (WJ) technology plays a significant role in the field of remanufacturing cleaning. The cleaning capacity of a WJ is severely restricted by the water pressure, while the impact force will be too large a...

(This article belongs to the Collection Waste Utilization and Resource Recovery)
  • Article
  • Open Access
43 Citations
7,991 Views
16 Pages

Direct Metal Laser Sintering of Ti6Al4V for Biomedical Applications: Microstructure, Corrosion Properties, and Mechanical Treatment of Implants

  • Janette Brezinová,
  • Radovan Hudák,
  • Anna Guzanová,
  • Dagmar Draganovská and ,
  • Gabriela Ižaríková and
  • Juraj Koncz
  • + 1 author+ 0 author

20 July 2016

Ti6Al4V samples have been prepared by Direct Metal Laser Sintering (DMLS) with varied laser power. Some of the samples were stress-relief annealed. The microstructure of materials was investigated using a light microscopy. Columnar grains of martensi...

  • Article
  • Open Access
556 Views
14 Pages

Relationship Between Powder Flowability and Abrasive Discharge in an Industrial Metering Valve

  • David Žurovec,
  • Jakub Hlosta,
  • Jiří Neuwirth,
  • Leo Kasperčík and ,
  • Jan Diviš,
  • Jiří Rozbroj,
  • František Kopecký,
  • Jiří Dobiáš,
  • Jiří Zegzulka and
  • Jan Nečas
  • + 5 authors+ 0 author

20 August 2026

Efficient abrasive blasting requires precise control of abrasive mass flow, which is governed by both the metering system design and the flow properties of the abrasive material. This study investigates the influence of particle size distribution on...

(This article belongs to the Special Issue Single Particle Dynamics in Granular Systems)
  • Article
  • Open Access
26 Citations
5,257 Views
18 Pages

27 May 2021

Abrasive water jet machining is a proficient alternative for cutting difficult-to-machine materials with complex geometries, such as austenitic stainless steel 304L (AISI304L). However, due to differences in machining responses for varied material co...

(This article belongs to the Special Issue Advanced Manufacturing of Metals)
  • Article
  • Open Access
4 Citations
1,305 Views
16 Pages

21 July 2025

Twinning-induced plasticity (TWIP) steels represent a significant development in automotive steel production, characterized by advanced strength and ductility properties. The present study empirically investigated the effects of process parameters on...

(This article belongs to the Special Issue Progressive Technologies and Materials in Mechanical and Materials Engineering)
  • Article
  • Open Access
9 Citations
2,752 Views
20 Pages

25 September 2023

Abrasive waterjet technology is nowadays a well established non-conventional method with significant capabilities for material removal with high productivity and minimum environmental impact compared to other processes. However, in order to be in lin...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
9 Citations
2,847 Views
13 Pages

Durability and Abrasion Resistance of Innovative Recycled Pervious Concrete with Recycled Coarse Aggregate of Different Quality under Sulfate Attack

  • Minqi Hua,
  • Bo Chen,
  • Yun Liu,
  • Hui Liu and ,
  • Pinghua Zhu,
  • Chunhong Chen and
  • Xinjie Wang
  • + 2 authors+ 0 author

15 October 2021

Construction and demolition wastes (C&DWs) have raised a large number of ecological and environmental problems. Recycling C&DWs into arecycled concrete aggregate (RCA) will help save natural resources effectively and reduce the negative impac...

(This article belongs to the Special Issue High-Performance of Eco-Efficient Concrete, Volume 3)
  • Review
  • Open Access
149 Citations
36,244 Views
31 Pages

Contribution of Road Vehicle Tyre Wear to Microplastics and Ambient Air Pollution

  • Barouch Giechaskiel,
  • Theodoros Grigoratos,
  • Marcel Mathissen,
  • Joris Quik and ,
  • Peter Tromp,
  • Mats Gustafsson,
  • Vicente Franco and
  • Panagiota Dilara
  • + 3 authors+ 0 author

7 January 2024

Tyre particles are generated by shear forces between the tread and the road or by volatilisation. Tyre abrasion (wear) contributes from one-third to half of microplastics unintentionally released into the environment. The major part ends up in the so...

(This article belongs to the Section Sustainable Transportation)
  • Article
  • Open Access
4 Citations
2,232 Views
18 Pages

25 January 2023

With the increased requirement of miniaturization structures on hard and brittle substrates, micro abrasive air jet turning technology has become a promising machining technology for manufacturing miniaturization structures. This paper presents an in...

(This article belongs to the Section Advanced Manufacturing)
  • Review
  • Open Access
11 Citations
4,240 Views
17 Pages

30 December 2022

Mechanical mining is a widely used method of separating materials from the face to obtain a useful mineral (e.g., coal, metal ores, salts, and diamonds), to make underground workings (e.g., mine galleries, tunnels, and underground garages), level roa...

  • Article
  • Open Access
19 Citations
3,771 Views
14 Pages

Polishing Performance and Removal Mechanism of Core-Shell Structured Diamond/SiO2 Abrasives on Sapphire Wafer

  • Guangen Zhao,
  • Yongchao Xu,
  • Qianting Wang,
  • Jun Liu and ,
  • Youji Zhan and
  • Bingsan Chen
  • + 1 author+ 0 author

7 December 2022

Corrosive and toxic solutions are normally employed to polish sapphire wafers, which easily cause environmental pollution. Applying green polishing techniques to obtain an ultrasmooth sapphire surface that is scratch-free and has low damage at high p...

(This article belongs to the Special Issue Advanced Micro- and Nano-Manufacturing Technologies)
  • Article
  • Open Access
679 Views
23 Pages

23 February 2026

Abrasive air jet (AAJ) machining is a non-traditional technology used to pattern microstructures on a wide variety of engineering materials. Understanding the material removal mechanisms and the formation of micro-channels produced by AAJ is essentia...

(This article belongs to the Section Advanced Manufacturing)
  • Article
  • Open Access
10 Citations
2,607 Views
12 Pages

Research on the Preparation and Application of Fixed-Abrasive Tools Based on Solid-Phase Reactions for Sapphire Wafer Lapping and Polishing

  • Linlin Cao,
  • Xiaolong Zhou,
  • Yingjie Wang,
  • Zhilun Yang and ,
  • Duowen Chen,
  • Wei Wei and
  • Kaibao Wang
  • + 2 authors+ 0 author

20 September 2023

Single-crystal sapphire specimen (α-Al2O3) have been widely applied in the semiconductor industry, microelectronics, and so on. In order to shorten the production time and improve the processing efficiency of sapphire processing, an integrated...

(This article belongs to the Section D: Materials and Processing)
  • Article
  • Open Access
1,109 Views
11 Pages

Effect of Lapping Parameters on Material Removal Rate and Surface Roughness of GaN (0001) Plane

  • Hao Zhou,
  • Yongliang Shao,
  • Baoguo Zhang,
  • Haixiao Hu and ,
  • Yongzhong Wu and
  • Xiaopeng Hao
  • + 1 author+ 0 author

11 March 2026

As a critical pretreatment process for chemical and mechanical polishing (CMP), the lapping roughness of gallium nitride (GaN) crystals directly influences the outcome of subsequent polishing and the reliability of final devices. This study systemati...

(This article belongs to the Special Issue Advances in the Growth and Application of Nitride Crystals)
  • Article
  • Open Access
1 Citations
1,176 Views
16 Pages

16 February 2026

Silicon carbide (SiC) substrates have been widely adopted in high-performance applications such as power electronics, optoelectronics, and semiconductors. However, achieving high-quality processing remains a formidable challenge due to SiC’s in...

(This article belongs to the Special Issue Advanced Machining and Sustainable Manufacturing of Metallic Alloys)
  • Article
  • Open Access
12 Citations
2,647 Views
13 Pages

Study on Wavelet Packet Energy Characteristics on Friction Signal of Lapping with the Fixed Abrasive Pad

  • Zhankui Wang,
  • Zhao Zhang,
  • Shiwei Wang,
  • Minghua Pang and ,
  • Lijie Ma and
  • Jianxiu Su
  • + 1 author+ 0 author

21 June 2022

The surface condition of the fixed abrasive pad (FAP) has a significant impact on its machining performance, workpiece material removal rate (MRR), and surface roughness. To clarify the wavelet packet energy characteristics of friction signal under d...

(This article belongs to the Special Issue Frontiers in Ultra-Precision Machining, Volume II)
  • Review
  • Open Access
13 Citations
14,793 Views
14 Pages

Tire Wear, Tread Depth Reduction, and Service Life

  • Barouch Giechaskiel,
  • Christian Ferrarese and
  • Theodoros Grigoratos

Tires are important for the transmission of forces, good traction of the vehicle, and safety of the passengers. Tires also influence vehicle fuel consumption and cause tire and road wear pollution to the environment in the form of microplastics. In t...

  • Article
  • Open Access
13 Citations
3,369 Views
15 Pages

Water-Airborne-Particle Abrasion as a Pre-Treatment to Improve Bioadhesion and Bond Strength of Glass–Ceramic Restorations: From In Vitro Study to 15-Year Survival Rate

  • Luan Mavriqi,
  • Francesco Valente,
  • Bruna Sinjari,
  • Oriana Trubiani and ,
  • Sergio Caputi and
  • Tonino Traini
  • + 1 author+ 0 author

31 August 2021

The purposes of this study were to evaluate the efficacy of water–airborne-particle abrasion (WAPA) as pre-etching procedure for tooth surfaces to increase bond strength, and to compare the survival rate of WAPA vs. non-WAPA glass–ceramic restoration...

(This article belongs to the Section Biomaterials)
  • Article
  • Open Access
640 Views
14 Pages

Lapping of Soft-Brittle Lithium Niobate Crystal with Fixed Abrasive Pad

  • Nannan Zhu,
  • Xiaojun Gao,
  • Chao Tang,
  • Jiapeng Chen and
  • Yongwei Zhu

29 May 2026

Lithium niobate (LiNbO3, LN) single crystal is widely used in optoelectronic fields due to its excellent performance. However, its low hardness, high brittleness, and strong anisotropy lead to low processing efficiency and poor surface quality. Hydro...

(This article belongs to the Section Advanced and Functional Ceramics and Glasses)
  • Article
  • Open Access
11 Citations
3,391 Views
16 Pages

Effect of Carbon and Cooling Rate on the Structure of Hypereutectic High Chromium Cast Iron in the Cast State and after Heat Treatment

  • Aleksander Panichkin,
  • Aidar Kenzhegulov,
  • Axaule Mamaeva,
  • Alma Uskenbayeva and ,
  • Balzhan Kshibekova,
  • Akerke Imbarova and
  • Zhasulan Alibekov
  • + 2 authors+ 0 author

22 November 2023

The article presents experimental data on the changes in the structural parameters and properties of castings from high-chromium cast iron G-X300CrMo27-1 depending on the carbon content, which ranged from 2.8 to 4.5 wt. %. Castings were obtained unde...

(This article belongs to the Section Metal Composites)
  • Article
  • Open Access
25 Citations
3,895 Views
14 Pages

On the Effect of Multiple Passes on Kerf Characteristics and Efficiency of Abrasive Waterjet Cutting

  • Panagiotis Karmiris-Obratański,
  • Nikolaos E. Karkalos,
  • Rafał Kudelski,
  • Emmanouil L. Papazoglou and
  • Angelos P. Markopoulos

1 January 2021

Abrasive waterjet cutting is a well-established non-conventional technique for the processing of difficult-to-cut material and rendering of various complex geometries with high accuracy. However, as in every machining process, it is also required tha...

  • Article
  • Open Access
9 Citations
2,483 Views
16 Pages

25 July 2024

Double-sided planetary grinding (DSPG) with a fixed abrasive is widely used in sapphire substrate processing. Compared with conventional free abrasive grinding, it has the advantages of high precision, high efficiency, and environmental protection. I...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
1 Citations
2,034 Views
19 Pages

Abrasion Rates and Service Life of C2 Tyres for Vans

  • Barouch Giechaskiel,
  • Christian Ferrarese,
  • Theodoros Grigoratos and
  • Vicente Franco

5 February 2026

Vans (light commercial vehicles) account for only about 11% of the European light-duty vehicle fleet. However, they are mostly used in urban delivery and service operations where frequent stop-and-go driving increases tyre abrasion. Furthermore, thei...

  • Article
  • Open Access
2 Citations
1,689 Views
23 Pages

Synergistic Multi-Mechanism Enhancement in Chemomechanical Abrasive Polishing of Polycrystalline Diamond via a New SiO2–Diamond Slurry in High-Concentration H2O2 Solution

  • Xin Zheng,
  • Ke Zheng,
  • Jie Gao,
  • Yan Wang and ,
  • Pengtao An,
  • Yongqiang Ma,
  • Hongjun Hei,
  • Shuaiwu Qu and
  • Shengwang Yu
  • + 4 authors+ 0 author

4 August 2025

The high-efficiency polishing of large-sized polycrystalline diamond (PCD) wafers continues to pose significant challenges in its practical applications. Conventional mechanical polishing suffers from a low material removal rate (MRR) and surface dam...

(This article belongs to the Section Materials Physics)
  • Article
  • Open Access
18 Citations
3,219 Views
18 Pages

18 September 2023

The molecular models of nitrile–butadiene rubber (NBR) with varied contents of acrylonitrile (ACN) were developed and investigated to provide an understanding of the enhancement mechanisms of ACN. The investigation was conducted using molecular...

(This article belongs to the Section Polymer Analysis and Characterization)
  • Article
  • Open Access
1 Citations
1,186 Views
22 Pages

11 December 2025

The accurate modelling of material removal mechanisms in grinding processes requires precise constitutive equations describing dynamic material behaviour under extreme strain rates and large deformations. This study presents a novel methodology for o...

(This article belongs to the Special Issue Manufacturing Technology: Materials, Innovations and Applications, Second Edition)
  • Article
  • Open Access
13 Citations
7,344 Views
15 Pages

7 August 2019

Honing processes provide a special cross-hatch pattern to the internal surface of cylinders that favors oil flow. However, along honing operation the abrasive grains wear out and lose their ability to cut material. The honing chips mixed with oil fil...

  • Article
  • Open Access
1 Citations
2,828 Views
23 Pages

Effects of Hydrolysis Reaction and Abrasive Drag Force Accelerator on Enhancing Si-Wafer Polishing Rate and Improving Si-Wafer Surface Roughness

  • Min-Uk Jeon,
  • Pil-Su Kim,
  • Man-Hyup Han,
  • Se-Hui Lee and ,
  • Hye-Min Lee,
  • Su-Bin Kim,
  • Jin-Hyung Park,
  • Kyoo-Chul Cho,
  • Jinsub Park and
  • Jea-Gun Park
  • + 5 authors+ 0 author

14 August 2025

To satisfy the superior surface quality requirements in the fabrication of HBM (High-Bandwidth Memory) and 3D NAND Flash Memory, high-efficiency Si chemical mechanical planarization (CMP) is essential. In this study, a colloidal silica abrasive-based...

(This article belongs to the Section Nanocomposite Materials)
  • Article
  • Open Access
572 Views
19 Pages

High Removal Rates and Atomically Smooth Surfaces Are Achieved on Silicon Wafers Using the New SiO2@ZrO2 Core–Shell Abrasive

  • Maokui Wang,
  • Weilong He,
  • Kai Feng,
  • Rui Ye and ,
  • Yunci Wang,
  • Weiyi Guan,
  • Facheng Qiu,
  • Xing Fan and
  • Renlong Liu
  • + 4 authors+ 0 author

26 August 2026

The relentless miniaturization of integrated circuits demands chemical mechanical polishing (CMP) technologies that achieve both high material removal rates (MRR) and atomic-scale surface quality. Herein, we synthesize sub-100 nm SiO2@ZrO2 core&ndash...

(This article belongs to the Section Synthesis, Interfaces and Nanostructures)
  • Article
  • Open Access
11 Citations
5,376 Views
18 Pages

Surface Preparation for Coating and Erosion MRR of SS 304 Using Silicon Carbide Abrasive Jet

  • Deb Kumar Adak,
  • Vivekananda Pal,
  • Santanu Das,
  • Tina Ghara and ,
  • Hillol Joardar,
  • Nashmi Alrasheedi and
  • Barun Haldar
  • + 2 authors+ 0 author

28 December 2022

The surface preparation of shiny stainless steels is a must for applying esthetic paints, effective functional plasma spray coating, laser cladding, welding, etc., applications. The current work aims for effective surface roughening and erosion MRR o...

(This article belongs to the Special Issue Assessment of Abrasive Wear)
  • Article
  • Open Access
29 Citations
4,889 Views
16 Pages

8 March 2022

The braking system is one of the most important components in any motor vehicle. Its proper function in emergency situations may save road users’ lives. Today, as vehicles have more and more power at their disposal, leading to increased acceler...

  • Article
  • Open Access
27 Citations
4,241 Views
27 Pages

Tribo-Mechanical Investigation of Glass Fiber Reinforced Polymer Composites under Dry Conditions

  • Corina Birleanu,
  • Marius Pustan,
  • Mircea Cioaza,
  • Paul Bere and ,
  • Glad Contiu,
  • Mircea Cristian Dudescu and
  • Daniel Filip
  • + 2 authors+ 0 author

19 June 2023

Tribo-mechanical experiments were performed on Glass Fiber Reinforced Polymer (GRFP) composites against different engineering materials, and the tribological behavior of these materials under dry conditions was investigated. The novelty of this study...

(This article belongs to the Special Issue Mechanical Behavior of Polymeric Materials: Recent Trends and Advancements)
  • Article
  • Open Access
73 Citations
3,875 Views
14 Pages

Utilization of Improved Machine Learning Method Based on Artificial Hummingbird Algorithm to Predict the Tribological Behavior of Cu-Al2O3 Nanocomposites Synthesized by In Situ Method

  • Ayman M. Sadoun,
  • Ismail R. Najjar,
  • Ghazi S. Alsoruji,
  • M. S. Abd-Elwahed and ,
  • Mohamed Abd Elaziz and
  • Adel Fathy
  • + 1 author+ 0 author

11 April 2022

This paper presents a machine learning model to predict the effect of Al2O3 nanoparticles content on the wear rates in Cu-Al2O3 nanocomposite prepared using in situ chemical technique. The model developed is a modification of the random vector functi...

  • Article
  • Open Access
2 Citations
2,872 Views
11 Pages

Grindability of Ti−Nb−Cu Alloys for Dental Machining Applications

  • Masatoshi Takahashi,
  • Masafumi Kikuchi and
  • Yukyo Takada

18 May 2022

We developed high-strength Ti−Nb−Cu alloys and investigated their grindability. The grindability of each alloy was evaluated based on the volume of metal removed per minute (grinding rate) and on the ratio of the metal volume removed to t...

  • Article
  • Open Access
4 Citations
3,413 Views
12 Pages

19 March 2022

This article presents a methodological approach to modeling the processes of changing the dispersed composition of solid phase particles, such as granulation, crystallization, pyrolysis, and others. Granulation is considered as a complex process cons...

(This article belongs to the Special Issue Application of Mathematics for Modeling Industrial Innovative Systems and Processes)
  • Article
  • Open Access
7 Citations
2,359 Views
24 Pages

Enhanced Tribological and Mechanical Properties of Copper-Modified Basalt-Reinforced Epoxy Composites

  • Corina Birleanu,
  • Mircea Cioaza,
  • Razvan Udroiu,
  • Marius Pustan and ,
  • Paul Bere and
  • Lucian Lazarescu
  • + 1 author+ 0 author

1 January 2025

The increasing demand for high-performance materials in industrial applications highlights the need for composites with enhanced mechanical and tribological properties. Basalt fiber-reinforced polymers (BFRP) are promising materials due to their supe...

(This article belongs to the Special Issue Multifunctional Polymers and Their Composites and Structures: Design, Preparation and Properties)
  • Article
  • Open Access
3 Citations
2,292 Views
19 Pages

18 February 2025

High-pressure abrasive water jet (HP-AWJ) cutting is a prominent technology for processing a wide variety of materials. The structural parameters of the nozzle are important for the cutting performance of the HP-AWJ. This paper combines an abrasive p...

  • Article
  • Open Access
19 Citations
3,793 Views
23 Pages

Tribological Investigation of Glass Fiber Reinforced Polymer Composites against 52100 Chrome Alloy Steel Based on ELECTRE Decision-Making Method

  • Corina Birleanu,
  • Mircea Cioaza,
  • Florina Serdean,
  • Marius Pustan and ,
  • Paul Bere and
  • Glad Contiu
  • + 1 author+ 0 author

23 December 2023

Fibers play an important role when studying the tribological behavior of reinforced friction composites. The purpose of the current research is to develop a glass fiber reinforced polymer (GFRP) recipe with improved tribological properties as well as...

(This article belongs to the Special Issue Mechanical and Structure–Property Relationships of Polymer Composites II)

of 22