Direct ethanol fuel cells (DEFCs) have emerged as promising and advanced power systems that can considerably reduce fossil fuel dependence, and thus have attracted worldwide attention. DEFCs have many apparent merits over the analogous devices fed wi...
Ethanol is considered an alternative fuel to power fuel cells, especially due to its ease of transport and storage and renewable production on a large scale. However, its use in direct ethanol fuel cells (DEFC) is still limited by incomplete electro-...
Pt/C, PtMOn/C (M = Ni, Sn, Ti, and PtX/C (X = Rh, Ir) catalyst systems were prepared by using the pulse alternating current (PAC) technique. Physical and electrochemical parameters of samples were carried out by x-ray powder diffraction (XRD), transm...
Herein, we prepared a series of nanocomposite membranes based on chitosan (CS) and three compositionally and structurally different N-doped graphene derivatives. Two-dimensional (2D) and quasi 1D N-doped reduced graphene oxides (N-rGO) and nanoribbon...
Crosslinked membranes have been synthesized by a casting process using polybenzimidazole (PBI) and poly(vinyl benzyl chloride) (PVBC). The membranes were quaternized with 1,4-diazabicyclo[2.2.2]octane (DABCO) to obtain fixed positive quaternary ammon...
In this work, the metal content of Pd85Ni10Bi5/C catalysts for the alkaline ethanol-oxidation reaction was reduced from 40 wt.% (PdNiBi/C (40/60)) to 30 wt.% (PdNiBi/C (30/70)), 20 wt.% (PdNiBi/C (20/80)) and 10 wt.% (PdNiBi/C (10/90)), while increas...
Alkaline direct ethanol fuel cells (DEFCs) represent an efficient energy conversion device for sustainable ethanol fuel. In this study, a design with new structural parameters for the anodic flow field of the alkaline DEFC was modeled with the aid of...
In this study, Ag-MnxOy/C composite catalysts deposited on reduced graphene oxide (rGO) and, for the first time on N-doped graphene oxide (NGO), were prepared via a facile synthesis method. The influence of the carbon support material on the activity...
In this work, it has been experimentally proven that the kinetic performance of a common Direct Catalytic Ethanol Fuel Cell (DCEFC) can be increased by introducing nanostructured (ZnII,AlIII(OH)2)+NO3−·H2O Layered Double Hydroxides (LDHs...
This study experimentally investigates various flow field designs for a direct ethanol-based proton exchange membrane (PEM) fuel cell operated at a temperature above the vaporization temperature of water. It expands the designs of flow fields investi...
In this work, fully polysaccharide based membranes were presented as self-standing, solid polyelectrolytes for application in anion exchange membrane fuel cells (AEMFCs). For this purpose, cellulose nanofibrils (CNFs) were modified successfully with...
The use of alcohol blends in direct alcohol fuel cells may be a more environmentally friendly and less toxic alternative to the use of methanol alone in direct methanol fuel cells. This paper assesses the behaviour of a direct methanol fuel cell fed...
In view of a possible use as anode materials in acidic direct alcohol fuel cells, the electro-catalytic activity of Pt-Ni and Pt-M-Ni (M = Ru, Sn) catalysts for methanol and ethanol oxidation has been widely investigated. An overview of literature da...
The electrooxidation kinetics of ethanol is key to making direct ethanol fuel cells and electrocatalytically reforming ethanol viable technologies for a more sustainable energy conversion. In this study, the electrooxidation of ethanol was investigat...
Direct ethanol solid oxide fuel cells (SOFCs) are the most energy-efficient and low-carbon technology for renewable power generation from biomass fuels, but they are hindered by carbon deposition on the Ni-based cermet anode. In this work, excessive...
Proton exchange membrane fuel cells and direct alcohol fuel cells have been extensively studied over the last three decades or so. They have emerged as potential systems to power portable applications, providing clean energy, and offering good commer...
Securing ever-increasing energy demands while reducing resilience on fossil fuels is a major task of modern society. Fuel cells are devices in which the chemical energy of various fuels can be converted into clean electricity. Direct ethanol fuel cel...
A simple, low-cost analytical platform based on a commercial direct methanol–ethanol fuel cell (D(M–E)FC) combined with chemometric data analysis is investigated for the quantitative analysis and exploratory differentiation of pharmaceuti...
Platinum–tin-containing materials are the most popular catalysts for processes occurring in fuel cells with direct ethanol oxidation. Pulse electrolysis based on the electrochemical dispersion of platinum electrodes under the influence of alter...
Direct ethanol fuel cells (DEFCs) have gained considerable attention as promising power sources for sustainable energy conversion due to their high energy density, low toxicity, and renewable ethanol feedstock. However, the sluggish ethanol oxidation...
In this paper, a catalyst of hollow PdCu alloy nanocubes supported on nitrogen-doped graphene support (H-PdCu/ppy-NG) is successfully synthesized using a simple one-pot template-free method. Two other catalyst materials such as solid PdCu alloy parti...
Sn-Pd electrocatalysts with a constant atomic ratio of 60 at.% Sn-40 at.% Pd suitable for potential application in direct ethanol fuel cells were synthesized using a novel two-step electrodeposition method. First, Sn was electrodeposited in various f...
The understanding of electrocatalytic activity and poisoning resistance properties of Pt and Pd nanoparticles, recognized as the best electrocatalysts for the ethanol oxidation reaction, is an essential step for the commercialization of direct ethano...
The review article discusses the current status and recent findings of our investigations on the synthesis and characterization of carbon-supported PtRuMo electrocatalysts for direct alcohol fuel cells. In particular, the effect of the carbon support...
The ethanol oxidation reaction (EOR) is a key process for direct ethanol fuel cells (DEFCs), offering a high-energy-density and carbon-neutral pathway for sustainable energy conversion. However, the practical implementation of DEFCs is significantly...
Pt/nitrogen-doped reduced graphene oxide (N-GO) catalysts were prepared by one-step microwave-assisted ethylene glycol reduction using N-methyl-2-pyrrolidone (NMP) as the nitrogen source. Nitrogen doping in GO and the deposition of highly dispersed p...
Direct ethanol fuel cell (DEFC) has attracted wide attention due to its wide range of fuel sources, cleanliness, and high efficiency. However, the problems of low catalytic efficiency and poor catalyst stability still exist in DEFC catalysts, which r...
The enhancement of carbon-supported components is a crucial factor in augmenting the interplay between carbon-supported and metal-active components in the utilization of catalysts for direct ethanol fuel cells (DEFCs). Here, we propose a strategy for...
The direct utilization of anhydrous ethanol in solid oxide fuel cells (SOFC), with oxygen-storage anode materials of the type Cu-(ZrxCe1−xY0.2O2−δ-Al2O3), is presented. The ceramic processing of CeO2-Al2O3 and 8YSZ (8% mol yttria st...
It was already demonstrated by our research group that a direct catalytic methanol (or ethanol) fuel cell (DMFC) device can be used also for analytical purposes, such as the determination of ethanol content in beverages. In the present research we ex...
The high cost of Pt-based electrode materials limits the commercialization of fuel cells and their subsequent application in renewable energy production. It is thus necessary to develop economical, high-performance electrodes alongside biofuels to re...
A novel strategy for the qualitative analysis of carbohydrates is developed, utilizing a direct catalytic fuel cell (DCFC) as a sensor, combined with chemometric tools for processing the resulting response curves. Specifically, carbohydrate solutions...
In this work, sodium citrate (SC) was used as an additive to control the particle size and dispersion of Pt-Mn alloy nanoparticles deposited on a carbon support. SC was chosen, since it was the only additive tested that did not prevent Mn from co-dep...
Pt/C and Pt/SnOx/C catalysts were synthesized using the polyol method. Their structure, morphology and chemical composition were studied using a scanning electron microscope equipped with an energy dispersive X-ray spectrometer, transition electron m...
An efficient ethanol oxidation reaction (EOR) is required to enhance energy production in alcohol-based fuel cells. The use of bimetallic catalysts promises decreasing reliance on platinum group metal (PGM) electrocatalysts by minimizing the use of t...
PtSn-based catalysts are one of the most active materials toward that contribute ethanol oxidation reaction (EOR). In order to gain a better understanding of the Sn influence on the carbon monoxide (principal catalyst poison) and ethanol oxidation re...
To elucidate the atomic arrangement of a Pt-Rh-Sn ternary catalyst with a high catalytic activity for ethanol oxidation reaction (EOR) and high CO2 selectivity, we prepared a tandem Pt/Rh/SnOx, in which a Rh adlayer was deposited on a Pt substrate (R...
Self-sustained metal aerogels are emerging as advanced porous materials with a 3D network of nanostructures that are exclusively made of metals. Metal aerogels possess a distinctive combination of metallic nanoparticles with excellent electronic cond...
Solid oxide fuel cells (SOFC) have the advantage of being able to operate with fuels other than hydrogen. In particular, liquid fuels are especially attractive for powering portable applications such as small power generators or auxiliary power units...
Carbon nano-onions (CNOs) were successfully synthesized by employing the flame pyrolysis (FP) method, using flaxseed oil as a carbon source. The alcohol reduction method was used to prepare Pd/CNOs and Pd-Sn/CNOs electro-catalysts, with ethylene glyc...
Bioethanol can be efficiently produced from lignocellulosic biomass via two-phase processes, consisting of enzymatic hydrolysis and fermentation. To enhance economic and energy efficiency, a system combining separate hydrolysis and fermentation of bi...
The oxidation of palladium nanoparticles causes the performance degradation of alkaline direct ethanol fuel cells. Quantifying this oxidation is a task of tremendous importance to design mitigation strategies that extend the service life of catalysts...
The growing climate crisis inspires one of the greatest challenges of the 21st century—developing novel power sources. One of the concepts that offer clean, non-fossil electricity production is fuel cells, especially when the role of fuel is played b...
In Brazil, sucrose-rich broths (cane juice and/or molasses) are used to produce billions of liters of both fuel ethanol and cachaça per year using selected Saccharomyces cerevisiae industrial strains. Considering the important role of feedstoc...
The combination of ecologically acceptable polysaccharide (chitosan) and graphene oxide (GO) nanoparticles was used to produce the cell membrane for a direct alkaline ethanol fuel cell (DAEFC). Due to its great power efficiency and minimal influence...
A nanocomposite polymer membrane based on quaternized poly(vinyl alcohol)/fumed silica (QPVA/FS) was prepared via a quaternization process and solution casting method. The physico-chemical properties of the QPVA/FS membrane were investigated. Its hig...
This paper investigates the effects of using 10% v/v (E10) and 30% v/v (E30) ethanol–gasoline blends on spark ignition (SI) engine fuel consumption, brake-specific fuel consumption, brake thermal efficiency, combustion parameters and exhaust ga...
This study focuses on making non-precious electrocatalysts for improving the performance of Direct Alcohol Fuel Cells (DAFCs). Specifically, it examines the oxidation of ethanol and methanol. Conventional platinum-based catalysts are expensive and su...
In this study, a highly efficient carbon-supported Pd catalyst for the direct ethanol fuel cell was developed by electrodepositing nanostructured Pd on oxygen plasma-treated carbon fiber paper (Pd/pCFP). The oxygen plasma treatment has been shown to...
PtSn/C-type catalysts modified with Ta and Ru were prepared by the thermal decomposition of polymeric precursors with the following nominal compositions: Pt70Sn10Ta20/C, Pt70Sn10Ta15Ru5/C, Pt70Sn10Ta10Ru10/C and Pt70Sn10Ta5Ru15/C. The physicochemical...
of 2